obd2 tool

obdexpress.co.uk support

KESS V2 Tagged Posts

Ksuite V2.47 Win 7 8 10 free download and installation


continue reading..
3 readers |0 Comments|Reply

BDM Probe Adapters Full Set (Denso, Marelli, Bosch, Siemens)

BDM Adapters Full Set(22 pics) is

used with LED BDM Frame

to do chip tuning (Denso, Marelli, Bosch, Siemens)

via KTAG KESS V2 KTM100 Dimsport chiptuning tools


BDM Adapter Features:

Adapter width: ~60mm width for original BDM Probe, not for low quality plastic with 40mm width.Adapter thickness: 2mmAdapter colour: Green

22 BDM adapters includ

continue reading..
5 readers |0 Comments|Reply

How to reset Ktag and Kess V2 ECU tuning tool

Here is how to reset Ktag and Kess v2 ecu programmer.

1.Download version ksuite 2.08 here

2.Buy new sd card 1gb-2gb and format in fat32 ussing this program

3.For kess use this cfg and 4 file

Copy on sd card 4 file and in ksuite 2.08 open folder update and copy update folder

Connect kess and wait for update all protocol

4. For ktag buy new sd

continue reading..
7 readers |0 Comments|Reply

How to use Ktag 6.070 via Internet

Here is my experience of how to use  ktag sw 2.13 hw 6.070 internet connection solutionI´m posting the solution to solve all grey in ktag 6.070 coz network connection is not allowed to use with Ktag programmers except Ktag 7.020.1 install ksuite 2.08 2 download the file3 the file have 3 parts (sd card, update too ksuite, nxp bin if necessary)4 put

continue reading..
13 readers |0 Comments|Reply

Kess V2 and Galletto R/W Remap Mercedes W220 S500 ME 2.1

I’ve done a remap on a Mercedes-Benz W220 S500 10 days ago and it had a ME 2.1. I used Kess v2 clone and FgTech Galletto v54 do this ecu both over Diagnostic plug.


Reading is easy via OBD but it took almost a Hour to do, where writing takes 3 min approx. BUT you need to put the ECU into Programming mode manually, in the Kess manual says: Short

continue reading..
19 readers |0 Comments|Reply