Car Diagnostic Tool FAQ--UOBD2

Help you to be a car master

Lonsdor K518ISE program Volvo XC60 smart key

posted by Chasen on Oct 09, 2017 under Car Diagnostic Tool
tags: Lonsdor K518ISE K518

Lonsdor K518ISE key programmer is tested able to add Volvo XC60 smart key and program new keys when all key lost via OBD. Lonsdor K518ISE will bring professional locksmiths a cost-effective choice comparing with the 4s shops who charge a higher cost. Tools and adapter to prepare: Lonsdor K518ISE key programmer RN-01 FS-01 probe board Before programming Volvo XC60 key, you need to read the security data of two modules (CEM module and KVM module), then directly add the key or program new keys via OBD.

Note: The circuit board is coated with insulating glue, it is required to use the washing plate water to wash off the blue area of the insulation coating in the contact point (solder joint) , or power can not go through , if the needle of RN-01 board is broken, it will do to wire in the corresponding locations.  For the new version, the circuit is different, which requires to wire to read the anti-theft data, please refer to following guides to wire: Note: Connect power to read the data, it is needed to separate RN-01 board to the motherboard to prevent conduction; it is recommended that welding line should not exceed 15cm. Article from Lonsdor K518ISE Blog site: Lonsdor K518ISE program Volvo XC60 smart key

13 visits |0 Comments|Reply

Related Posts

There are no comments on this post

Write a New Comment on Lonsdor K518ISE program Volvo XC60 smart key

Please Log In or Register to post comments.

[]